In this article, we’ll be working through an example of the workflow of model stacking with the stacks package. At a high level, the workflow looks something like this:
The package is closely integrated with the rest of the functionality in tidymodels—we’ll load those packages as well, in addition to some tidyverse packages to evaluate our results later on.
In this example, we’ll make use of the
stacks, giving experimental results on
hatching behavior of red-eyed tree frog embryos!
Red-eyed tree frog (RETF) embryos can hatch earlier than their normal 7ish days if they detect potential predator threat. Researchers wanted to determine how, and when, these tree frog embryos were able to detect stimulus from their environment. To do so, they subjected the embryos at varying developmental stages to “predator stimulus” by jiggling the embryos with a blunt probe. Beforehand, though some of the embryos were treated with gentamicin, a compound that knocks out their lateral line (a sensory organ.) Researcher Julie Jung and her crew found that these factors inform whether an embryo hatches prematurely or not!
We’ll start out with predicting
latency (i.e. time to
hatch) based on other attributes. We’ll need to filter out NAs
(i.e. cases where the embryo did not hatch) first.
data("tree_frogs") # subset the data <- tree_frogs %>% tree_frogs filter(!is.na(latency)) %>% select(-c(clutch, hatched))
Taking a quick look at the data, it seems like the hatch time is pretty closely related to some of our predictors!
theme_set(theme_bw()) ggplot(tree_frogs) + aes(x = age, y = latency, color = treatment) + geom_point() + labs(x = "Embryo Age (s)", y = "Time to Hatch (s)", col = "Treatment")
Let’s give this a go!
At the highest level, ensembles are formed from model
definitions. In this package, model definitions are an instance of
containing a model specification (as defined in the
and, optionally, a preprocessor (as defined in the
package). Model definitions specify the form of candidate ensemble
Defining the constituent model definitions is undoubtedly the longest
part of building an ensemble with
stacks. If you’re
familiar with tidymodels “proper,” you’re probably fine to skip this
section, keeping a few things in mind:
fit_resamples()objects by setting the
save_pred = TRUEand
save_workflow = TRUE. Note the use of the
control_stack_*()convenience functions below!
We’ll first start out with splitting up the training data, generating resamples, and setting some options that will be used by each model definition.
# some setup: resampling and a basic recipe set.seed(1) <- initial_split(tree_frogs) tree_frogs_split <- training(tree_frogs_split) tree_frogs_train <- testing(tree_frogs_split) tree_frogs_test set.seed(1) <- rsample::vfold_cv(tree_frogs_train, v = 5) folds <- tree_frogs_rec recipe(latency ~ ., data = tree_frogs_train) <- metric_set(rmse)metric
Tuning and fitting results for use in ensembles need to be fitted
with the control arguments
save_pred = TRUE and
save_workflow = TRUE—these settings ensure that the
assessment set predictions, as well as the workflow used to fit the
resamples, are stored in the resulting object. For convenience, stacks
control_stack_*() functions to generate the
appropriate objects for you.
In this example, we’ll be working with
fit_resamples() from the tune package, so we will use the
following control settings:
<- control_stack_grid() ctrl_grid <- control_stack_resamples()ctrl_res
We’ll define three different model definitions to try to predict time to hatch—a K-nearest neighbors model (with hyperparameters to tune), a linear model, and a support vector machine model (again, with hyperparameters to tune).
Starting out with K-nearest neighbors, we begin by creating a
parsnip model specification:
# create a model definition <- knn_spec nearest_neighbor( mode = "regression", neighbors = tune("k") %>% ) set_engine("kknn") knn_spec#> K-Nearest Neighbor Model Specification (regression) #> #> Main Arguments: #> neighbors = tune("k") #> #> Computational engine: kknn
Note that, since we are tuning over several possible numbers of
neighbors, this model specification defines multiple model
configurations. The specific form of those configurations will be
determined when specifying the grid search in
From here, we extend the basic recipe defined earlier to fully specify the form of the design matrix for use in a K-nearest neighbors model:
# extend the recipe <- knn_rec %>% tree_frogs_rec step_dummy(all_nominal_predictors()) %>% step_zv(all_predictors()) %>% step_impute_mean(all_numeric_predictors()) %>% step_normalize(all_numeric_predictors()) knn_rec#> Recipe #> #> Inputs: #> #> role #variables #> outcome 1 #> predictor 4 #> #> Operations: #> #> Dummy variables from all_nominal_predictors() #> Zero variance filter on all_predictors() #> Mean imputation for all_numeric_predictors() #> Centering and scaling for all_numeric_predictors()
Starting with the basic recipe, we convert categorical variables to dummy variables, remove column with only one observation, impute missing values in numeric variables using the mean, and normalize numeric predictors. Pre-processing instructions for the remaining models are defined similarly.
Now, we combine the model specification and pre-processing
instructions defined above to form a
# add both to a workflow <- knn_wflow workflow() %>% add_model(knn_spec) %>% add_recipe(knn_rec) knn_wflow#> ══ Workflow ════════════════════════════════════════════════════════════════════ #> Preprocessor: Recipe #> Model: nearest_neighbor() #> #> ── Preprocessor ──────────────────────────────────────────────────────────────── #> 4 Recipe Steps #> #> • step_dummy() #> • step_zv() #> • step_impute_mean() #> • step_normalize() #> #> ── Model ─────────────────────────────────────────────────────────────────────── #> K-Nearest Neighbor Model Specification (regression) #> #> Main Arguments: #> neighbors = tune("k") #> #> Computational engine: kknn
Finally, we can make use of the workflow, training set resamples,
metric set, and control object to tune our hyperparameters. Using the
grid argument, we specify that we would like to optimize
over four possible values of
k using a grid search.
# tune k and fit to the 5-fold cv set.seed(2020) <- knn_res tune_grid( knn_wflow,resamples = folds, metrics = metric, grid = 4, control = ctrl_grid ) knn_res#> # Tuning results #> # 5-fold cross-validation #> # A tibble: 5 × 5 #> splits id .metrics .notes .predictions #> <list> <chr> <list> <list> <list> #> 1 <split [343/86]> Fold1 <tibble [4 × 5]> <tibble [0 × 3]> <tibble [344 × 5]> #> 2 <split [343/86]> Fold2 <tibble [4 × 5]> <tibble [0 × 3]> <tibble [344 × 5]> #> 3 <split [343/86]> Fold3 <tibble [4 × 5]> <tibble [0 × 3]> <tibble [344 × 5]> #> 4 <split [343/86]> Fold4 <tibble [4 × 5]> <tibble [0 × 3]> <tibble [344 × 5]> #> 5 <split [344/85]> Fold5 <tibble [4 × 5]> <tibble [0 × 3]> <tibble [340 × 5]>
knn_res object fully specifies the candidate
members, and is ready to be included in a
Now, specifying the linear model, note that we are not optimizing
over any hyperparameters. Thus, we use the
function rather than
tune_bayes() when fitting to our resamples.
# create a model definition <- lin_reg_spec linear_reg() %>% set_engine("lm") # extend the recipe <- lin_reg_rec %>% tree_frogs_rec step_dummy(all_nominal_predictors()) %>% step_zv(all_predictors()) # add both to a workflow <- lin_reg_wflow workflow() %>% add_model(lin_reg_spec) %>% add_recipe(lin_reg_rec) # fit to the 5-fold cv set.seed(2020) <- lin_reg_res fit_resamples( lin_reg_wflow,resamples = folds, metrics = metric, control = ctrl_res ) lin_reg_res#> # Resampling results #> # 5-fold cross-validation #> # A tibble: 5 × 5 #> splits id .metrics .notes .predictions #> <list> <chr> <list> <list> <list> #> 1 <split [343/86]> Fold1 <tibble [1 × 4]> <tibble [0 × 3]> <tibble [86 × 4]> #> 2 <split [343/86]> Fold2 <tibble [1 × 4]> <tibble [0 × 3]> <tibble [86 × 4]> #> 3 <split [343/86]> Fold3 <tibble [1 × 4]> <tibble [0 × 3]> <tibble [86 × 4]> #> 4 <split [343/86]> Fold4 <tibble [1 × 4]> <tibble [0 × 3]> <tibble [86 × 4]> #> 5 <split [344/85]> Fold5 <tibble [1 × 4]> <tibble [0 × 3]> <tibble [85 × 4]>
Finally, putting together the model definition for the support vector machine:
# create a model definition <- svm_spec svm_rbf( cost = tune("cost"), rbf_sigma = tune("sigma") %>% ) set_engine("kernlab") %>% set_mode("regression") # extend the recipe <- svm_rec %>% tree_frogs_rec step_dummy(all_nominal_predictors()) %>% step_zv(all_predictors()) %>% step_impute_mean(all_numeric_predictors()) %>% step_corr(all_predictors()) %>% step_normalize(all_numeric_predictors()) # add both to a workflow <- svm_wflow workflow() %>% add_model(svm_spec) %>% add_recipe(svm_rec) # tune cost and sigma and fit to the 5-fold cv set.seed(2020) <- svm_res tune_grid( svm_wflow, resamples = folds, grid = 6, metrics = metric, control = ctrl_grid ) svm_res#> # Tuning results #> # 5-fold cross-validation #> # A tibble: 5 × 5 #> splits id .metrics .notes .predictions #> <list> <chr> <list> <list> <list> #> 1 <split [343/86]> Fold1 <tibble [6 × 6]> <tibble [0 × 3]> <tibble [516 × 6]> #> 2 <split [343/86]> Fold2 <tibble [6 × 6]> <tibble [0 × 3]> <tibble [516 × 6]> #> 3 <split [343/86]> Fold3 <tibble [6 × 6]> <tibble [0 × 3]> <tibble [516 × 6]> #> 4 <split [343/86]> Fold4 <tibble [6 × 6]> <tibble [0 × 3]> <tibble [516 × 6]> #> 5 <split [344/85]> Fold5 <tibble [6 × 6]> <tibble [0 × 3]> <tibble [510 × 6]>
Altogether, we’ve created three model definitions, where the K-nearest neighbors model definition specifies 4 model configurations, the linear regression specifies 1, and the support vector machine specifies 6.
With these three model definitions fully specified, we are ready to begin stacking these model configurations. (Note that, in most applied settings, one would likely specify many more than 11 candidate members.)
The first step to building an ensemble with stacks is to create a
data_stack object—in this package, data stacks are tibbles
(with some extra attributes) that contain the assessment set predictions
for each candidate ensemble member.
We can initialize a data stack using the
stacks() #> # A data stack with 0 model definitions and 0 candidate members.
stacks() function works sort of like the
ggplot() constructor from ggplot2—the function creates a
basic structure that the object will be built on top of—except you’ll
pipe the outputs rather than adding them with
add_candidates() function adds ensemble members to
<- tree_frogs_data_st stacks() %>% add_candidates(knn_res) %>% add_candidates(lin_reg_res) %>% add_candidates(svm_res) tree_frogs_data_st#> # A data stack with 3 model definitions and 11 candidate members: #> # knn_res: 4 model configurations #> # lin_reg_res: 1 model configuration #> # svm_res: 6 model configurations #> # Outcome: latency (numeric)
As mentioned before, under the hood, a
is really just a tibble with some extra attributes. Checking out the
as_tibble(tree_frogs_data_st) #> # A tibble: 429 × 12 #> latency knn_res_1_1 knn_res…¹ knn_r…² knn_r…³ lin_r…⁴ svm_r…⁵ svm_r…⁶ svm_r…⁷ #> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> #> 1 142 76.5 67.8 83.2 83.0 114. 71.0 71.0 84.6 #> 2 79 74.3 71.0 64.2 63.9 78.6 72.5 72.5 71.4 #> 3 50 75.0 71.4 64.9 64.3 81.5 71.0 71.0 70.6 #> 4 68 47.9 49.7 54.0 54.0 78.6 71.1 71.1 70.4 #> 5 64 60.9 53.1 48.4 48.3 36.5 71.0 71.0 51.5 #> 6 52 207. 168. 129. 124. 124. 71.1 71.1 92.1 #> 7 39 30.8 29.1 32.7 33.0 35.2 72.5 72.5 50.6 #> 8 46 32.3 31.1 35.0 34.6 37.1 72.5 72.5 51.2 #> 9 137 75.9 78.8 90.4 90.6 78.8 71.1 71.1 70.6 #> 10 73 67.7 73.6 67.9 67.4 38.8 72.5 72.5 51.7 #> # … with 419 more rows, 3 more variables: svm_res_1_5 <dbl>, svm_res_1_2 <dbl>, #> # svm_res_1_6 <dbl>, and abbreviated variable names ¹knn_res_1_2, #> # ²knn_res_1_3, ³knn_res_1_4, ⁴lin_reg_res_1_1, ⁵svm_res_1_1, ⁶svm_res_1_4, #> # ⁷svm_res_1_3
The first column gives the first response value, and the remaining columns give the assessment set predictions for each ensemble member. Since we’re in the regression case, there’s only one column per ensemble member. In classification settings, there are as many columns as there are levels of the outcome variable per candidate ensemble member.
That’s it! We’re now ready to evaluate how it is that we need to combine predictions from each candidate ensemble member.
The outputs from each of these candidate ensemble members are highly
correlated, so the
blend_predictions() function performs
regularization to figure out how we can combine the outputs from the
stack members to come up with a final prediction.
<- tree_frogs_model_st %>% tree_frogs_data_st blend_predictions()
blend_predictions function determines how member
model output will ultimately be combined in the final prediction by
fitting a LASSO model on the data stack, predicting the true assessment
set outcome using the predictions from each of the candidate members.
Candidates with nonzero stacking coefficients become members.
To make sure that we have the right trade-off between minimizing the
number of members and optimizing performance, we can use the
To show the relationship more directly:
autoplot(tree_frogs_model_st, type = "members")
If these results were not good enough,
blend_predictions() could be called again with different
penalty. As it is,
blend_predictions() picks the penalty parameter with the
numerically optimal results. To see the top results:
autoplot(tree_frogs_model_st, type = "weights")
Now that we know how to combine our model output, we can fit the candidates with non-zero stacking coefficients on the full training set.
<- tree_frogs_model_st %>% tree_frogs_model_st fit_members()
Model stacks can be thought of as a group of fitted member models and a set of instructions on how to combine their predictions.